A giant painted clay dodo on a stone base beside a wooden chair, made from The Clay Hole paper template
The dodo's sections lifted apart beside a chair to show how they fit, made from The Clay Hole paper template
Clay dodo seen from behind, its curled tail tuft whistle beside a chair, made from The Clay Hole paper template
Clay dodo in profile facing left beside a chair, its tail tuft at right, made from The Clay Hole paper template
Clay dodo in profile facing right beside a chair, its tail tuft at left, made from The Clay Hole paper template
A clay dodo seen from above beside a wooden chair, tail tuft behind its head, made from The Clay Hole paper template
The dodo's tail tuft whistle on a table beside a mug, the big bird behind, made from The Clay Hole paper template
A clay dodo standing beside a grand piano in a bright room, made from The Clay Hole paper template
Numbered section map of the dodo template, S1 to S6, made from The Clay Hole paper template

Legendary paper template 220, a Legendary showpiece

Ridiculous, Giant Dodo Bird Whistle Legendary Level slab pottery template

A floor-size dodo built from flat clay facets in six kiln-sized sections, with a tail tuft that really whistles. On a low faceted stone, about 20 in across the body and 34 in from beak to tail tuft.

Part of Legendary Showpieces, the Legendary level, sold on its own and never in a bundle.

  • Legendary Level
  • 6 sections
  • About 60 hours at the table
  • About 176 lb of clay
  • 281 pages
  • Requires extra purchases

You will need epoxy putty and a slow-setting epoxy for the joints, a craft stick and a 1/2 in dowel for the whistle, and a flat display board at least 24 x 24 in, bought separately. The guide lists every tool and material.

Kiln: Every section fits a kiln at least 28 in across and 27 in deep inside, such as a Skutt KM-1227.

How Templates Work

"Explain it like I'm 12"

Ever get to a step and think, okay, but why? This is for that.

It's the whole build again, start to finish, in plain words and far more thorough than the template, with the reason behind each step. (Like why the bird whistle has you prick all those dots.)

It comes with the template once it's yours, bought or picked as a member. Already have it? Log in and this button opens your guide.

Ask Clayla

I trained Clayla on every template, drawings and all. Once this template is yours, she'll talk you through any step that has you stuck.

Before you buy, she's happy to answer anything about how the paper templates work. Already own it? Log in first so she knows it's yours.

$225.00 one PDF, 281 pages, yours to print as often as you like

Buy any three Legendary templates and the fourth is on me. The cheapest of the four comes off at checkout by itself.

Flip through the free sample
  • Members get five templates free every month, and a Legendary Level template uses five of them. Log in to claim this one.
  • Not a member yet: see what a membership includes.
  • Delivered as a download link by email the moment the order goes through.

Template Gift Certificate

Give Ridiculous, Giant Dodo Bird Whistle as a gift

Pick an amount. They can spend it on this one or any other template, and whatever’s left stays on their code.

How much?
How should they get it?

You get the printable certificate the moment you pay: a full page, plus a little card that folds to fit inside a greeting card. It never expires, and whatever they don’t spend stays on their code.

For community studios

Community Studio License

$675

Run a studio the public can join? Print this template for every member at your location, as often as they need it, for good.

Get the license

Your cart shows the template plus a license line. Together they come to $675. Your receipt is your license, and its order number is your license number.

Community Studio License

One studio. Every member. Print it forever.

If you run a studio the public can join, this is the version for you. Print this template as many times as your members need, for as long as your studio is open. Nobody has to count copies.

Who it is for

  • Community studios, meaning studios the public can join as members or come to for classes.
  • One license covers one location. Every other location needs its own license.
  • The price is the same for everyone. I don't offer discounts on it, for non-profits or anyone else.

What you can do

  • Print as many copies as you like for anyone making pottery at your location, members and class students alike.
  • Teach classes and workshops with it, and charge for the class.
  • Let people take their printed copies home and keep them.

What you can't do

  • Share the PDF itself. It stays with your staff, who print it. No emailing it, posting it or putting it in a shared drive.
  • Sell printed copies on their own, or charge for them apart from a class.
  • Use it at any other location.
  • Edit it, rebrand it, take off my logo or copyright, or turn it into a template of your own. Print it at 100 percent.
  • Resell or hand off the license. If your studio moves, it moves with you. If you sell the studio, it goes with the business.

A Legendary license covers the guide's own pages. The large format prints are not part of it.

The rules everyone follows

Everyone who builds from this template at your studio follows the same template rules every buyer does. What they make is theirs to keep, give or sell. Anything Advanced Level or above that gets sold online credits me, Dan Pearce, as the designer and links to theclayhole.com.

Want a design you can sell outright?

A custom template is yours with full commercial rights under section 9.3 of my custom template terms: sell the pottery, sell or share the files, and call the design your own. See custom templates

The price

Triple the price of the template, with a $25 minimum. It replaces the single version, so you never pay for both. Already bought it on this account? You only pay the difference.

Your receipt is your license. It lists your studio, what the license covers, and an order number that doubles as your license number. Break the rules and the license ends, with no refund.

Read the full terms

What you will make

Ridiculous, Giant Dodo Bird Whistle, 41 7/8 in tall to the top of the head

A huge hooked beak, a round fat body, short stout legs on big three-toed feet, and a curly tail that really whistles. Bare clay, it reads as a dodo from across the room.

A dodo is already ridiculous. A dodo that whistles is better. The curly tuft on its tail lifts off, you put a little water in it, and when you blow into the mouthpiece it coos and bubbles. The water stays in the tuft. It never goes anywhere near the big bird.

The whole bird is flat facets, like folded paper, so every face is a flat place to paint. Paint the feathers on with underglaze, one facet at a time, and never carve them. The photos show a painted museum-model dodo, but the colors are yours.

Finished41 7/8 in tall to the top of the head, about 20 in across and 34 in from beak to tail tuft
Sections6, each fired on its own
Heaviest sectionAbout 27 lb wet
ClayAbout 176 lb, 8 bags of 25 lb
At the tableAbout 60 hours, over 6 to 8 weeks
Drying3 to 4 weeks, slowly
Display baseA flat board at least 24 x 24 in
Built in sections

Six sections that each fit a kiln, joined for good at the end

Every section fits a kiln at least 28 in across and 27 in deep inside, such as a Skutt KM-1227. Each section dries, bisques and glazes on its own, then the joints close with epoxy putty once the last firing is done.

The sections

SectionWhat it isWet, across x tallWet weight
S1The stone base23.8 x 4.4 inAbout 21 lb
S2Feet, legs and belly22.6 x 12.5 inAbout 21 lb
S3Breast and neck22.1 x 22.9 inAbout 27 lb
S4Rump22.4 x 20.7 inAbout 26 lb
S5Head and beak19.8 x 12.3 inAbout 13 lb
S6Tail tuft whistle6.4 x 11.0 inAbout 4 lb

Sizes include each section's shrink slab, the clay disc it fires on. Fired, everything comes out about 12 percent smaller.

Section map of the dodo pottery template: six numbered sections, the stone, feet and belly, breast, rump, head and tail tuft
The section map, S1 at the bottom
What is in the template

A 50 page guide and every pattern piece, 281 pages in one PDF

  • The guide: tools and materials, clay, building every section step by step, keeping clay workable for weeks, drying in a dry, average or humid room, joints, firing, glazing, assembly, and what to do when something goes wrong
  • Every one of the 163 pieces, cut from 137 patterns, on 231 Letter pages. The big ones print as tiles with overlap strips, tape lines, matching marks and a tile map
  • A private link to the same patterns on 18 large sheets, 24 x 36 in, for a copy shop, with every piece whole. It is the easier way to print
  • A 4 in check bar on every Letter page and a 10 in bar on every large sheet, so you prove the print before you cut
  • A numbered section map, a checklist for every section, every joint lettered on both of its edges, and a page of ideas for your own carving
Cover page of the Ridiculous, Giant Dodo Bird Whistle, a Legendary pottery paper template from The Clay Hole
The cover

Want to see how it reads before you commit to a month of evenings? The free sample has the contents, the first pages of the guide and a pattern page.

Flip through the free sample
A string around your finger

The final lap is yours

I drew these so the fiddly part is already solved. The seams line up, the lid fits, and the piece comes out the size the template says. That’s my part. Everything after the last seam belongs to you.

Press a texture into the slab before you cut it. Carve or pierce it at leather hard. Give it feet, a knob or a handle I never drew. Glaze it in something I would never pick in a million years. Two people can build the same template side by side and walk away with pieces that look nothing alike, and that’s exactly how it should go.

  • Texture the slab first
  • Carve, pierce or stamp
  • Add feet, knobs or handles
  • Sprigs and slip trailing
  • Glaze it your way

One thing to keep in mind: leave the bones alone. Thinning a wall that carries weight, cutting through a seam or piling extra clay on a lid changes how the piece holds together in the kiln. Decorate the skin as much as you like.

And if you'd rather the whole piece be yours from the first seam, I'll design a custom template around your idea.

Questions

The ones that come up

What size kiln do I need

Every section fits a kiln at least 28 in across and 27 in deep inside, such as a Skutt KM-1227. That is measured with room to spare from the walls and the lid, at the wet size, which is the biggest a section ever is. A smaller kiln will not take the widest sections.

Which clay

One grogged stoneware that fires between cone 5 and cone 6, the same clay for every section, shrink slab and prop, so everything shrinks together. You need about 176 lb, which is 8 bags of 25 lb, spare clay included.

How do I print the big patterns

Take the large-format link from the guide to a copy shop and ask for 18 sheets at 24 x 36 in, printed at 100 percent. Or print the 231 Letter pages at home and tape the tiles together; the marks line up and a check bar on every page proves the size.

Do I need a membership to buy this

No. It is $225 for anyone. Current members can claim it free, and a Legendary Level template uses five of the month’s free picks.

Is it part of a bundle

No. Legendary templates are sold on their own. The one exception is The Matterhorn, which is in The Epic Mountains Bundle.

Can I sell what I make from it

Yes. What you make is yours to keep, give or sell. The pattern file is for your own use and is not to be shared.

Members

A whole month of free picks, spent on one dodo

Current members of The Clay Hole pick five templates free every month, and a Legendary Level template takes five of them. If you build it, bring it in. I would love to see it standing.