Faceted blue stoneware dog treat jar with a caramel collar, gold buckle and paw tag, made from The Clay Hole paper template
Back of a faceted blue stoneware dog treat jar by a sunny window with a mug, made from The Clay Hole paper template
Faceted dog treat jar full of biscuits with its dog head lid set beside it, made from The Clay Hole paper template

Paper template 170, a hand-building pattern

The Geometric Dog Treat Jar Expert slab pottery template

New: nobody has built this one yet

You can download this one with confidence. Every template has been audited at least three times for accuracy. So far every template built and every template in progress has come out 100 percent perfect, and the same will likely be true for this one.

Every template starts out in my New Pattern Program, marked NEW, until someone builds it in clay and it checks out. This one should be sound and work as drawn, so use it at your own discretion and be ready to adjust on the fly if your project needs it. Pivoting mid-build is part of the fun of pottery.

Members: be the first to show me this one fully assembled and I’ll fire that piece free, with your name on its tile for good. See which templates are still up for grabs.

Made this one? Text it to the studio or tag @theclayhole on Instagram.

A faceted dog treat jar shaped like a dog: a gem cut body, a clay collar with a buckle and a paw print tag, and a head for a lid with big floppy ears. Finished: 10 5/8 in tall to the tops of the ears and 7 13/16 in across the widest facets, holding about 13 cups, at 12 percent shrinkage.

Part of the Kitchen and Home collection.

  • Expert
  • About 6 hours over three sittings, plus drying
  • About 8 1/4 lb of clay
  • 10 template sheets, 25 pages
How Templates Work

Explain it like I'm 12

Ever get to a step and think, okay, but why? This is for that.

It's the whole build again, start to finish, in plain words and far more thorough than the template, with the reason behind each step. (Like why the bird whistle has you prick all those dots.)

It comes with the template once it's yours, bought or picked as a member. Already have it? Log in and this button opens your guide.

Ask Clayla

I trained Clayla on every template, drawings and all. Once this template is yours, she'll talk you through any step that has you stuck.

Before you buy, she's happy to answer anything about how the paper templates work. Already own it? Log in first so she knows it's yours.

$20.00 one PDF, 25 pages, yours to print as often as you like

Flip through the free sample
  • Members get five templates free every month. Log in to claim this one.
  • Not a member yet: see what a membership includes.
  • Delivered as a download link by email the moment the order goes through.
For community studios

Community Studio License

$60

Run a studio the public can join? Print this template for every member at your location, as often as they need it, for good.

Get the license

Your cart shows the template plus a license line. Together they come to $60. Your receipt is your license, and its order number is your license number.

Community Studio License

One studio. Every member. Print it forever.

If you run a studio the public can join, this is the version for you. Print this template as many times as your members need, for as long as your studio is open. Nobody has to count copies.

Who it is for

  • Community studios, meaning studios the public can join as members or come to for classes.
  • One license covers one location. Every other location needs its own license.
  • The price is the same for everyone. I don't offer discounts on it, for non-profits or anyone else.

What you can do

  • Print as many copies as you like for anyone making pottery at your location, members and class students alike.
  • Teach classes and workshops with it, and charge for the class.
  • Let people take their printed copies home and keep them.

What you can't do

  • Share the PDF itself. It stays with your staff, who print it. No emailing it, posting it or putting it in a shared drive.
  • Sell printed copies on their own, or charge for them apart from a class.
  • Use it at any other location.
  • Edit it, rebrand it, take off my logo or copyright, or turn it into a template of your own. Print it at 100 percent.
  • Resell or hand off the license. If your studio moves, it moves with you. If you sell the studio, it goes with the business.

The rules everyone follows

Everyone who builds from this template at your studio follows the same template rules every buyer does. What they make is theirs to keep, give or sell. Anything Advanced or above that gets sold online credits me, Dan Pearce, as the designer and links to theclayhole.com.

Want a design you can sell outright?

A custom template is yours with full commercial rights under section 9.3 of my custom template terms: sell the pottery, sell or share the files, and call the design your own. See custom templates

The price

Triple the price of the template, with a $25 minimum. It replaces the single version, so you never pay for both. Already bought it on this account? You only pay the difference.

Your receipt is your license. It lists your studio, what the license covers, and an order number that doubles as your license number. Break the rules and the license ends, with no refund.

Read the full terms

Bundles you may love

This one isn’t in a bundle, but if it’s your kind of build, these probably are too.

What you will make

A faceted dog treat jar with a collar, a tag and floppy ears

A dog treat jar that is a dog. The body is cut like a gem, a round clay collar with a buckle holds the lid, a paw print tag hangs on the chest, and the lid is a faceted head with two big floppy ears. It holds about 13 cups of treats.

26 slab pieces from 21 numbered templates, the longest the 18 3/8 in collar strip, every faceted edge lettered and beveled. Every piece is drawn at wet size for a 1/4 in, and 1/8 in for the buckle and tag slab, and the finished sizes are what comes out of the glaze kiln at 12 percent shrinkage, which is what most of the studio's stoneware does.

Height10 5/8 in to the tops of the ears
Across7 13/16 in at the widest facets
Opening4 7/8 in across, inside the collar
Holdsabout 13 cups of treats
What is in the template

25 pages. The biggest pieces print in two parts that tape together.

  • 10 template sheets, each piece printed at exact size, the biggest in two parts with an overlap strip, a tape line and matching triangles, with a 1 inch check square and a 5 centimeter bar on every sheet so you can prove the print before you cut
  • A cover with the finished size drawn and labeled, so you know what you are building before you roll a slab
  • One page on printing, rolling, cutting and the seam method, the same on every template
  • Assembly in 26 numbered steps written for this piece, then drying, glazing, and the three things that go wrong and why
  • A size table at 10, 12 and 14 percent shrinkage, because 52 Buff, B-Mix and porcelain do not shrink the same

The pieces

  • 01 Floorcut 1
  • 02 Lower frontcut 1
  • 03 Lower side, leftcut 1
  • 03 Lower side, rightcut 1
  • 04 Lower backcut 1
  • 05 Upper frontcut 1
  • 06 Upper side, leftcut 1
  • 06 Upper side, rightcut 1
  • 07 Upper backcut 1
  • 08 Shouldercut 1
  • 09 Lid floorcut 1
  • 10 Cheek frontcut 1
  • 11 Cheek side, leftcut 1
  • 11 Cheek side, rightcut 1
  • 12 Cheek backcut 1
  • 13 Head frontcut 1
  • 14 Head side, leftcut 1
  • 14 Head side, rightcut 1
  • 15 Head backcut 1
  • 16 Crowncut 1
  • 17 Ear, leftcut 1
  • 17 Ear, rightcut 1
  • 170-18 Collarcut 1
  • 170-19 Flangecut 1
  • 20 Bucklecut 1
  • 21 Tagcut 1
Cover page of The Geometric Dog Treat Jar, a printable pottery paper template from The Clay Hole in Draper, Utah
The cover
The template sheets of The Geometric Dog Treat Jar shown small, a hand-building pattern from The Clay Hole
The template sheets, shown small
Why it works

Worked out from the finished piece backward

My standard for these is spot on, not close. A template that is close is worse than no template, because you trust it. So every number in this template comes from the finished size, through the slab thickness and the shrinkage, to the flat shape that makes it. Then the finished file was measured to prove the shapes landed at that size.

1

Exact scale, with a check

Every sheet carries a 1 inch square and a 5 centimeter bar. Print at 100 percent, measure the square, and the whole sheet is right. If it is not, the print is wrong and you reprint before cutting anything.

2

Seams and bevels planned

Each edge that needs a bevel is hatched on the template and the steps say which way it leans. Mitered corners come out square because all four pieces come from one outline.

3

Tapers cut as fans

A wall that flares is drawn as part of a ring, not a trapezoid, so it closes into a cone with no pleats. The curves are worked out from the exact rim and foot sizes.

4

Fits that are already solved

Lids, flanges, saucers and ridges carry the clearance built in, at wet size, so the parts still fit after they shrink together in the kiln.

MeasurementWet, on the template52 Buff, 10 percentMost stoneware, 12 percentPorcelain, 14 percent
Height to the ear tops12 1/8 in10 7/8 in10 5/8 in10 7/16 in
Across the widest facets8 7/8 in8 in7 13/16 in7 5/8 in
Collar, outside6 in5 7/16 in5 5/16 in5 3/16 in
Opening5 1/2 in5 in4 7/8 in4 3/4 in
Lid, collar to crown3 1/8 in2 13/16 in2 3/4 in2 11/16 in
How to use it

Print, check, roll, cut, build

Print at 100 percent

Actual size, never Fit to page. Plain copy paper works. Card stock survives a wet slab and can be used again.

Measure the square

A ruler on the 1 inch square settles whether the sheet is right. Thirty seconds that saves a whole piece.

Roll 1/4 in, and 1/8 in for the buckle and tag

Every clearance assumes it. Let the slab firm up to soft leather hard before you cut, so it holds an edge and still bends.

Cut the count, then build

Lay the paper on the slab, cut straight down just outside the edge, bevel where the hatching says, and follow the 26 steps. Score, slip, press, compress, every seam.

A string around your finger

The final lap is yours

I drew these so the fiddly part is already solved. The seams line up, the lid fits, and the piece comes out the size the template says. That’s my part. Everything after the last seam belongs to you.

Press a texture into the slab before you cut it. Carve or pierce it at leather hard. Give it feet, a knob or a handle I never drew. Glaze it in something I would never pick in a million years. Two people can build the same template side by side and walk away with pieces that look nothing alike, and that’s exactly how it should go.

  • Texture the slab first
  • Carve, pierce or stamp
  • Add feet, knobs or handles
  • Sprigs and slip trailing
  • Glaze it your way

One thing to keep in mind: leave the bones alone. Thinning a wall that carries weight, cutting through a seam or piling extra clay on a lid changes how the piece holds together in the kiln. Decorate the skin as much as you like.

And if you'd rather the whole piece be yours from the first seam, I'll design a custom template around your idea.

Questions

The ones that come up

Do I need a membership to buy this

No. It is $20 for anyone. Members get five templates free every month, along with everything else a membership includes.

How do members get it free

Log in with the email your membership is under and claim it at a $0 checkout. Then the download is right here on this page. Every membership comes with five free templates a month.

Can I make it bigger or smaller

Yes. Print every piece of the template at the same percentage and the parts still fit each other. Anything over about 115 percent runs a piece off the page, so check the sheet before you cut.

Which clay

Any of the studio's stoneware. The template is drawn for a 1/4 in, and 1/8 in for the buckle and tag slab and the sizes assume 12 percent shrinkage. 52 Buff comes out a little bigger, porcelain a little smaller, and the size table in the template covers both.

Can I sell what I make from it

Yes. The pots are yours. The template file is for your own use and is not to be shared, which is the whole of the terms.

What if a piece does not fit on my printer

Every part fits one letter sheet with a 3/8 inch margin, which every ordinary home and office printer reaches. Landscape sheets print landscape. Let the printer rotate the page rather than scaling it. The biggest pieces print in two parts that tape together, and the template gives the length to check once they are taped.

Members

Free templates, every single month

178 templates now and more as they are drawn, and current members of The Clay Hole pick five free every month. Print one tonight and bring it to your next session. I’d love to see what comes out of the kiln.

Sent as download links by email the moment the order goes through. Already a member? Log in, and five templates a month are free, one at a time.