{"title":"Insane Pottery Paper Templates","description":"\u003cp\u003eInsane slab pottery templates with dozens of numbered pieces: giant chess, a marble run, an origami dragon and Big Ben, printed on sheets that tape together.\u003c\/p\u003e","products":[{"product_id":"paper-template-geometric-whale-shark","title":"The Geometric Whale Shark Paper Template","description":"\u003cp\u003eA faceted whale shark wall planter 19 1\/2 in long, built from 37 flat facets over six ribs. A geometric whale shark that hangs on the wall and holds plants along its back. Its 37 flat facets, each unfolded from one exact model, go on over six ribs on a back plate that prints across three sheets. Every edge names the piece it meets and the angle to cut it at.\u003c\/p\u003e\n\u003cp\u003eFinished: 19 1\/2 in long, 6 15\/16 in tall, 2 3\/8 in off the wall, a planter of about 1 1\/4 cups at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Back plate (cut 1), Rib 1 (cut 1), Rib 2 (cut 1), Rib 3 (cut 1), Rib 4 (cut 1), Rib 5 (cut 1), Rib 6 (cut 1), Facet N (cut 1), Facet A1 (cut 1), Facet A2 (cut 1), Facet A5 (cut 1), Facet A6 (cut 1), Facet A7 (cut 1), Facet B1 (cut 1), Facet B2 (cut 1), Facet B3 (cut 1), Facet B4 (cut 1), Facet B5 (cut 1), Facet B6 (cut 1), Facet B7 (cut 1), Facet C1 (cut 1), Facet C2 (cut 1), Facet C3 (cut 1), Facet C4 (cut 1), Facet C5 (cut 1), Facet C6 (cut 1), Facet C7 (cut 1), Facet D1 (cut 1), Facet D2 (cut 1), Facet D3 (cut 1), Facet D4 (cut 1), Facet D5 (cut 1), Facet D6 (cut 1), Facet D7 (cut 1), Facet T1 (cut 1), Facet T2 (cut 1), Facet T3 (cut 1), Facet T4 (cut 1), Facet T5 (cut 1), Facet T6 (cut 1), Facet T7 (cut 1), Facet T8 (cut 1), Facet T9 (cut 1), Facet T10 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 21 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe back plate prints in three parts that tape together, with matching triangles and a length to check\u003c\/li\u003e\n\u003cli\u003eA hardware page: what to buy and a drawing of how it goes together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50925206143024,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/geometric-whale-shark-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793410914"},{"product_id":"paper-template-marble-run-tower","title":"The Marble Run Tower Paper Template","description":"\u003cp\u003eA square tower with eight channels that spiral down it twice, each wrapping a corner like a rain gutter. A square tower with eight glazed channels that spiral down it twice, each one wrapping a corner like a rain gutter. A marble dropped in the funnel turns every corner, drops through a hole onto the next channel, then rolls through a window and out an arched door into the tray. The channels hang on hook tabs, so they fire on their own.\u003c\/p\u003e\n\u003cp\u003eFinished: 16 1\/16 in tall, a 4 in tower in an 8 5\/8 in tray at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e13 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Front wall (cut 1), Right wall (cut 1), Back wall (cut 1), Left wall (cut 1), Ramp (cut 1), Chute floor (cut 1), Chute side (cut 2), Chute end (cut 1), Cap (cut 1), Flange, long (cut 2), Flange, short (cut 2), Funnel wall (cut 4), Tray floor (cut 1), Tray rim (cut 4), Channel floor (cut 7), Long outer wall (cut 7), Long back wall (cut 7), Short outer wall (cut 7), Short back wall (cut 7), Channel end (cut 14), Hook tab (cut 16), Last channel floor (cut 1), Last channel wall (cut 2), Last channel end (cut 2)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 26 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe tower walls and the tray floor print in two parts that tape together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $30 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50925206765616,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/marble-run-tower-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793410928"},{"product_id":"paper-template-chess-set","title":"The Chess Set Paper Template","description":"\u003cp\u003eA 19 1\/2 inch board and 32 six-sided pieces, every body folded from one flat net. A full stoneware chess set: a 19 1\/2 inch board built as four quarter boards on hollow rims, and 32 six-sided pieces, each body folded from one flat net. Every foot clears its square by at least 0.22 inch. One clay and two glazes for both sides, so the whole set shrinks together.\u003c\/p\u003e\n\u003cp\u003eFinished: a 19 1\/2 in board with 2 1\/4 in squares, and 32 pieces from 2 in to 4 1\/8 in tall at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Quarter board (cut 4), Long rim (cut 8), Short rim and rib (cut 16), Pawn foot (cut 16), Pawn body (cut 16), Pawn collar (cut 16), Rook and bishop foot (cut 8), Rook body (cut 4), Rook plate (cut 4), Knight foot (cut 4), Knight side (cut 8), Knight band (cut 4), Bishop body (cut 4), Queen foot (cut 2), Queen body (cut 2), Queen plate (cut 2), King foot (cut 2), King body (cut 2), King plate (cut 2), King cross (cut 2)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 32 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe quarter board prints in four parts and the rims in two, taped together with matching triangles and a size to check\u003c\/li\u003e\n\u003cli\u003eA hardware page: what to buy and a drawing of how it goes together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 3\/8 in and 3\/16 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50925208010800,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/chess-set-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793410943"},{"product_id":"paper-template-cascade-fountain","title":"The Cascade Fountain Paper Template","description":"\u003cp\u003eA tabletop fountain with four trays that zigzag the water down into its basin. A tabletop fountain: a tower stands in a basin, and four trays on it pass the water down, left, right, left, in thin ribbons through notched lips. A small pump hides inside the tower and the tower lifts out for cleaning. Every tray is mitered from flat slabs, with the angle printed on each edge.\u003c\/p\u003e\n\u003cp\u003eFinished: 10 7\/16 in tall, the basin 9 3\/16 in x 7 13\/16 in, holding about 3\/4 gal at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Basin floor (cut 1), Basin front wall (cut 1), Basin back wall (cut 1), Basin side wall (cut 2), Tower front wall (cut 1), Tower back wall (cut 1), Tower side wall (cut 2), Top tray floor (cut 1), Top tray front (cut 1), Top tray back (cut 1), Top tray side (cut 2), Tray floor (cut 3), Tray front (cut 2), Lower tray front (cut 1), Tray side (cut 4), Notched tray side (cut 2), Tray back (cut 3), Lip (cut 4)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 27 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe basin floor, its long walls and the tower walls print in two parts that tape together, with matching marks and a length to check\u003c\/li\u003e\n\u003cli\u003eA hardware page: what to buy and a drawing of how it goes together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $35 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50925208764464,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/cascade-fountain-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780618"},{"product_id":"paper-template-castle-dice-tower","title":"The Castle Dice Tower Paper Template","description":"\u003cp\u003eAn 11 inch castle keep with three baffles inside that rolls your dice out its gate into a walled courtyard. A castle keep that rolls your dice: drop them in the top, and three baffles and an exit ramp send them out the gate into a felt-lined courtyard. Every gap inside fires to at least 1 1\/4 in, so a full handful never jams. The keep lifts out of its walled bailey, and four round corner towers wear lift-off cone roofs.\u003c\/p\u003e\n\u003cp\u003eFinished: 11 11\/16 in tall, 8 7\/8 in x 10 5\/8 in overall, a 6 5\/8 in x 3 15\/16 in dice court at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e14 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Front wall (cut 1), Back wall (cut 1), Left wall (cut 1), Right wall (cut 1), Baffle (cut 3), Exit ramp (cut 1), Floor (cut 1), Courtyard side wall (cut 2), Courtyard front and back wall (cut 2), Inner wall (cut 2), Tower wall (cut 4), Cone roof (cut 4), Flange ring (cut 4), Long strip (cut 1), Short strip (cut 2)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 35 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe keep walls and the floor print in parts that tape together\u003c\/li\u003e\n\u003cli\u003eA felt page with a drawing of the dice path through the keep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $30 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50925484245040,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/castle-dice-tower-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793421212"},{"product_id":"paper-template-origami-dragon","title":"The Origami Dragon Paper Template","description":"\u003cp\u003eA seated dragon built from 81 flat slab facets, like a folded paper dragon, with pleated wings, horns, plates down its back and a tail curled round to its feet. A seated dragon in 81 flat facets that meet in crisp fold lines, with pleated wings braced on its back, folded horns, plates down its neck and spine, and a tail curled round to its feet. Every edge of every piece carries a letter for the edge it meets and the exact angle to cut it, worked out from the finished dragon in 3D. The pack has a map of where every numbered piece goes and a paper gauge for the angles.\u003c\/p\u003e\n\u003cp\u003eFinished: 16 5\/16 in tall to the wing tips, 13 7\/16 in x 11 3\/16 in across at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Floor (cut 1), 02 Chest underside, left (cut 1), 02 Chest underside, right (cut 1), 03 Foot, left (cut 1), 03 Foot, right (cut 1), 04 Leg front, left (cut 1), 04 Leg front, right (cut 1), 05 Leg outside, left (cut 1), 05 Leg outside, right (cut 1), 06 Leg back, left (cut 1), 06 Leg back, right (cut 1), 07 Leg inside, left (cut 1), 07 Leg inside, right (cut 1), 08 Flank, left (cut 1), 08 Flank, right (cut 1), 09 Rump, left (cut 1), 09 Rump, right (cut 1), 10 Side, left (cut 1), 10 Side, right (cut 1), 11 Back, left (cut 1), 11 Back, right (cut 1), 12 Chest, left (cut 1), 12 Chest, right (cut 1), 13 Neck 1 front, left (cut 1), 13 Neck 1 front, right (cut 1), 14 Neck 1 side, left (cut 1), 14 Neck 1 side, right (cut 1), 15 Neck 1 back, left (cut 1), 15 Neck 1 back, right (cut 1), 16 Neck 2 front, left (cut 1), 16 Neck 2 front, right (cut 1), 17 Neck 2 side, left (cut 1), 17 Neck 2 side, right (cut 1), 18 Neck 2 back, left (cut 1), 18 Neck 2 back, right (cut 1), 19 Neck 3 front, left (cut 1), 19 Neck 3 front, right (cut 1), 20 Neck 3 side, left (cut 1), 20 Neck 3 side, right (cut 1), 21 Neck 3 back, left (cut 1), 21 Neck 3 back, right (cut 1), 22 Throat, left (cut 1), 22 Throat, right (cut 1), 23 Head side, left (cut 1), 23 Head side, right (cut 1), 24 Nape, left (cut 1), 24 Nape, right (cut 1), 25 Crown, left (cut 1), 25 Crown, right (cut 1), 26 Forehead, left (cut 1), 26 Forehead, right (cut 1), 27 Cheek, left (cut 1), 27 Cheek, right (cut 1), 28 Jaw, left (cut 1), 28 Jaw, right (cut 1), 29 Muzzle, left (cut 1), 29 Muzzle, right (cut 1), 30 Snout top (cut 1), 31 Nose (cut 1), 32 Chin (cut 1), 33 Horn, left (cut 1), 33 Horn, right (cut 1), 34 Neck plate 1 (cut 1), 35 Neck plate 2 (cut 1), 36 Neck plate 3 (cut 1), 37 Back plate 1 (cut 1), 38 Back plate 2 (cut 1), 39 Back plate 3 (cut 1), 40 Wing 1, left (cut 1), 40 Wing 1, right (cut 1), 41 Wing 2, left (cut 1), 41 Wing 2, right (cut 1), 42 Wing 3, left (cut 1), 42 Wing 3, right (cut 1), 43 Wing 4, left (cut 1), 43 Wing 4, right (cut 1), 44 Tail 1 (cut 1), 45 Tail 2 (cut 1), 46 Tail 3 (cut 1), 47 Tail 4 (cut 1), 48 Tail 5 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe tall pieces print in two parts that tape together, with matching marks and a length to check\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50925508231216,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/origami-dragon-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780727"},{"product_id":"paper-template-full-clay-hole-dinnerware-set","title":"The Full Clay Hole Dinnerware Set Paper Template","description":"\u003cp\u003eSeven pieces, twelve facets below a crisp ridge and perfectly round above. Seven pieces built to sit together: dinner and salad plates, a bowl, a salad serving bowl, a big soup bowl with a handle, a mug and a tumbler. Every one has twelve flat facets below a crisp ridge and a perfectly round rim above it, and they are sized to each other, so the salad plate nests in the dinner plate's well and the serving bowl is exactly as wide as the dinner plate. The plates stack, the bowls nest (three of them inside the serving bowl), and the tumbler, mug and soup bowl each get their own spot on the shelf. Sand the bare foot rings and bottoms smooth after the glaze firing, and the stacks won't scuff each other. It is the most ambitious thing I have put in a pack, and every piece in it is also sold on its own.\u003c\/p\u003e\n\u003cp\u003eFinished: seven pieces, a 10 1\/2 in dinner plate to a 13 1\/2 oz tumbler at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Dinner plate Floor and well (cut 1), Dinner plate Flange (cut 4), Dinner plate Foot ring half (cut 2), Salad plate Floor and well (cut 1), Salad plate Flange (cut 2), Salad plate Foot ring half (cut 2), Bowl Floor (cut 1), Bowl Faceted band piece (cut 2), Bowl Lip band piece (cut 2), Serving bowl Floor (cut 1), Serving bowl Faceted band piece (cut 3), Serving bowl Lip band piece (cut 4), Soup bowl Floor (cut 1), Soup bowl Faceted band piece (cut 2), Soup bowl Lip band piece (cut 2), Soup bowl Handle (cut 1), Mug Floor (cut 1), Mug Faceted band (cut 1), Mug Lip band piece (cut 2), Mug Handle (cut 1), Tumbler Floor (cut 1), Tumbler Faceted band (cut 1), Tumbler Lip band piece (cut 2)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 53 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe dinner plate's floor and well and the mug's and tumbler's faceted bands print in two parts that tape together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach piece also comes on its own: \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-dinner-plate\"\u003eThe Dinner Plate\u003c\/a\u003e, \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-salad-plate\"\u003eThe Salad Plate\u003c\/a\u003e, \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-dinnerware-bowl\"\u003eThe Dinnerware Bowl\u003c\/a\u003e, \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-salad-serving-bowl\"\u003eThe Salad Serving Bowl\u003c\/a\u003e, \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-dinnerware-soup-bowl\"\u003eThe Dinnerware Soup Bowl\u003c\/a\u003e, \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-dinnerware-mug\"\u003eThe Dinnerware Mug\u003c\/a\u003e and \u003ca href=\"https:\/\/theclayhole.com\/products\/paper-template-dinnerware-tumbler\"\u003eThe Dinnerware Tumbler\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50930842042416,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/full-clay-hole-dinnerware-set-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793569373"},{"product_id":"paper-template-twisted-tower-vase","title":"The Twisted Tower Vase Paper Template","description":"\u003cp\u003eAn 18 1\/4 inch square vase that turns a third of a turn from foot to rim, built from 48 flat triangles. A square vase that turns a third of a turn as it rises, so sharp spiral corners wind from the foot to the rim. Six tiers of flat triangles, every one unfolded from one exact model, go on one tier at a time, each checked with its own paper gauge. It stands 18 1\/4 in tall on a 5 in square base and holds about a gallon of water for tall branches.\u003c\/p\u003e\n\u003cp\u003eFinished: 18 1\/4 in tall, 5 in square at the base, holds about a gallon at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Base (cut 1), Tier 1 triangle A (cut 4), Tier 1 triangle B (cut 4), Tier 2 triangle A (cut 4), Tier 2 triangle B (cut 4), Tier 3 triangle A (cut 4), Tier 3 triangle B (cut 4), Tier 4 triangle A (cut 4), Tier 4 triangle B (cut 4), Tier 5 triangle A (cut 4), Tier 5 triangle B (cut 4), Tier 6 triangle A (cut 4), Tier 6 triangle B (cut 4)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 23 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50930945851440,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/twisted-tower-vase-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793571404"},{"product_id":"paper-template-faceted-ginger-jar-lamp","title":"The Faceted Ginger Jar Lamp Paper Template","description":"\u003cp\u003eA 22 inch ten-sided ginger jar lamp cut like a gem, built from a hundred flat triangles. A ten-sided ginger jar lamp, 22 in tall, faceted like a cut gem from a hundred flat triangles in five offset rings. Every edge names the piece it meets and the angle to cut it at, and four ring frames inside drop into place by themselves to keep each ring true. A lamp pipe, a wiring kit and an 18 in drum shade finish it.\u003c\/p\u003e\n\u003cp\u003eFinished: 22 in tall, 13 5\/8 in across at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Foot panel (cut 9), Notched foot panel (cut 1), Base plate (cut 1), Band 1 up (cut 10), Band 1 down (cut 10), Ring 2 frame (cut 5), Band 2 up (cut 10), Band 2 down (cut 10), Ring 3 frame (cut 5), Top plate (cut 1), Neck panel (cut 10), Band 5 down (cut 10), Band 5 up (cut 10), Ring 5 frame (cut 5), Band 4 down (cut 10), Band 4 up (cut 10), Ring 4 frame (cut 5), Band 3 down (cut 10), Band 3 up (cut 10)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 42 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe base plate prints in two parts that tape together\u003c\/li\u003e\n\u003cli\u003eA lamp parts page with a drawing of the pipe, the plates and the cord path\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50930966724656,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/faceted-ginger-jar-lamp-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780594"},{"product_id":"paper-template-big-ben-clock-tower","title":"The Big Ben Clock Tower Paper Template","description":"\u003cp\u003eA 35 inch clock tower in five stacked sections, with four working dials and a Westminster chime. A 35 inch Big Ben in five slab sections that stack on flanges, with four working dials, a Westminster chime and an open belfry that lifts off. Every wall, roof facet and pinnacle is drawn from one model, with the knife angle printed on every beveled edge. The clock works page shows the four movements we use and proves they fit inside the clock stage.\u003c\/p\u003e\n\u003cp\u003eFinished: 35 in tall, a 6 3\/4 in square base and four 4 in dials at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e11 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Plinth wall (cut 4), Step wall (cut 4), Plinth ledge strip (cut 4), Step plate (cut 1), Shaft wall (cut 8), Corner pier (cut 8), Course strip (cut 8), Shaft bottom frame (cut 2), Flange strip, long (cut 6), Flange strip, short (cut 6), Stage floor (cut 1), Clock stage wall (cut 4), Shelf ledge (cut 3), Speaker shelf (cut 1), Dial (cut 4), Dial frame (cut 4), Hour bar (cut 48), Gable foot (cut 4), Gable top (cut 4), Corner post (cut 4), Gallery (cut 1), Belfry flange, long (cut 2), Belfry flange, short (cut 2), Spike (cut 4), Belfry wall (cut 4), Eave frame (cut 1), Roof facet (cut 4), Cap plate (cut 1), Belfry pinnacle (cut 4), Lantern wall (cut 4), Lantern lid (cut 1), Spire face (cut 4), Ball (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 72 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eA clock works page: the movements to buy and a drawing of how they fit in the clock stage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $60 for everyone else. Drawn for a 1\/4 in, trim 3\/16 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50930984255536,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/big-ben-clock-tower-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780582"},{"product_id":"paper-template-backgammon-set","title":"The Backgammon Set Paper Template","description":"\u003cp\u003eA backgammon board in two halves, with checker racks and a raised bar. A full backgammon board in two halves that push together at the bar and come apart for storage. Each half has a rack along its end where fifteen checkers stand on edge, a pocket for the dice, and a raised bar deck for every checker that gets hit. The two halves are the same half turned end for end, so you cut one set of patterns twice, and when the game is over one half flips onto the other and closes like a case.\u003c\/p\u003e\n\u003cp\u003eFinished: a 21 1\/8 in x 12 3\/4 in board in two halves, about 1 in tall, with 32 checkers 1 1\/8 in across at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 2), Side rim (cut 4), End rim (cut 2), Rack wall (cut 2), Cross wall (cut 4), Bar rail (cut 4), Bar deck (cut 2), Checker (cut 32)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 26 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe floor prints in four parts and the long strips in two, taped together with matching triangles and a size to check\u003c\/li\u003e\n\u003cli\u003eA glaze plan page showing which point takes which glaze\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $35 for everyone else. Drawn for a 3\/8 in and 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50934286975024,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/backgammon-set-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793579469"},{"product_id":"paper-template-geometric-octopus","title":"The Geometric Octopus Paper Template","description":"\u003cp\u003eA faceted wall octopus 28 9\/16 in across, built in nine pieces that hang separately: a body with two eyes and eight arms. A geometric octopus for the wall, in nine faceted pieces that hang on their own screws and read as one animal. Every facet is unfolded from one exact model, and every edge names the piece it meets and the angle to cut it. An eight-panel wall map at fired size puts every screw in the right place.\u003c\/p\u003e\n\u003cp\u003eFinished: 28 9\/16 in across, 15 7\/16 in tall, 3 11\/16 in off the wall at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e38 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Body LT (cut 1), Body LR (cut 1), Body LB (cut 1), Body LL (cut 1), Body UT (cut 1), Body UR (cut 1), Body UB (cut 1), Body UL (cut 1), Body CAP (cut 1), Body back (cut 1), Eye L cap (cut 1), Eye L ring (cut 1), Eye R cap (cut 1), Eye R ring (cut 1), Hood strip (cut 18), Hood cap (cut 18), Arm 1 back (cut 1), Arm 1 left (cut 1), Arm 1 right (cut 1), Arm 1 root (cut 1), Arm 2 back (cut 1), Arm 2 left (cut 1), Arm 2 right (cut 1), Arm 2 root (cut 1), Arm 3 back (cut 1), Arm 3 left (cut 1), Arm 3 right (cut 1), Arm 3 root (cut 1), Arm 4 back (cut 1), Arm 4 left (cut 1), Arm 4 right (cut 1), Arm 4 root (cut 1), Arm 5 back (cut 1), Arm 5 left (cut 1), Arm 5 right (cut 1), Arm 5 root (cut 1), Arm 6 back (cut 1), Arm 6 left (cut 1), Arm 6 right (cut 1), Arm 6 root (cut 1), Arm 7 back (cut 1), Arm 7 left (cut 1), Arm 7 right (cut 1), Arm 7 root (cut 1), Arm 8 back (cut 1), Arm 8 left (cut 1), Arm 8 right (cut 1), Arm 8 root (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 35 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe longest pieces print in two parts that tape together\u003c\/li\u003e\n\u003cli\u003eA hanging parts page and a hanging page, with an eight-panel wall map at fired size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50936053104688,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/geometric-octopus-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793581405"},{"product_id":"paper-template-origami-peacock","title":"The Origami Peacock Paper Template","description":"\u003cp\u003eA peacock built from 49 flat slab facets, like a folded paper peacock, displaying a half-round fan of fourteen pleated panels. A peacock standing in front of its fan, fourteen pleated panels spread in a half circle behind it. It stands 8 1\/16 in tall and 16 11\/16 in across the fan, a real centerpiece for a shelf or a table.\u003c\/p\u003e\n\u003cp\u003eFinished: 8 1\/16 in tall, 16 11\/16 in across the fan and 10 1\/16 in front to back at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Floor (cut 1), 02 Lower chest, left (cut 1), 02 Lower chest, right (cut 1), 03 Front side, left (cut 1), 03 Front side, right (cut 1), 04 Rear side, left (cut 1), 04 Rear side, right (cut 1), 05 Rump, left (cut 1), 05 Rump, right (cut 1), 06 Upper chest, left (cut 1), 06 Upper chest, right (cut 1), 07 Upper rump, left (cut 1), 07 Upper rump, right (cut 1), 08 Shoulder, left (cut 1), 08 Shoulder, right (cut 1), 09 Front of the back, left (cut 1), 09 Front of the back, right (cut 1), 10 Back, left (cut 1), 10 Back, right (cut 1), 11 Neck 1 (cut 1), 12 Neck 2 (cut 1), 13 Neck 3 (cut 1), 14 Head side, left (cut 1), 14 Head side, right (cut 1), 15 Throat, left (cut 1), 15 Throat, right (cut 1), 16 Crown, left (cut 1), 16 Crown, right (cut 1), 17 Forehead and beak top, left (cut 1), 17 Forehead and beak top, right (cut 1), 18 Cheek and beak side, left (cut 1), 18 Cheek and beak side, right (cut 1), 19 Beak underside (cut 1), 20 Crest (cut 1), 21 Fan brace (cut 1), 22 Fan 1, left (cut 1), 22 Fan 1, right (cut 1), 23 Fan 2, left (cut 1), 23 Fan 2, right (cut 1), 24 Fan 3, left (cut 1), 24 Fan 3, right (cut 1), 25 Fan 4, left (cut 1), 25 Fan 4, right (cut 1), 26 Fan 5, left (cut 1), 26 Fan 5, right (cut 1), 27 Fan 6, left (cut 1), 27 Fan 6, right (cut 1), 28 Fan 7, left (cut 1), 28 Fan 7, right (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $30 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50947717529648,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/origami-peacock-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793597124"},{"product_id":"paper-template-origami-stegosaurus","title":"The Origami Stegosaurus Paper Template","description":"\u003cp\u003eA stegosaurus built from 71 flat slab facets, like a folded paper dinosaur, with twelve folded plates and four tail spikes. A stegosaurus with folded plates down its back and spikes on its tail, built from flat slab facets. About 14 15\/16 in long nose to tail. It is an Insane build, several evenings at the table.\u003c\/p\u003e\n\u003cp\u003eFinished: 14 15\/16 in long and 7 13\/16 in tall to the tallest plate at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Front foot, left (cut 1), 01 Front foot, right (cut 1), 02 Front leg, left (cut 1), 02 Front leg, right (cut 1), 03 Back foot, left (cut 1), 03 Back foot, right (cut 1), 04 Back leg, left (cut 1), 04 Back leg, right (cut 1), 05 Belly (cut 1), 06 Rear side, left (cut 1), 06 Rear side, right (cut 1), 07 Rear top, left (cut 1), 07 Rear top, right (cut 1), 08 Middle side, left (cut 1), 08 Middle side, right (cut 1), 09 Middle top, left (cut 1), 09 Middle top, right (cut 1), 10 Front side, left (cut 1), 10 Front side, right (cut 1), 11 Front top, left (cut 1), 11 Front top, right (cut 1), 12 Neck side, left (cut 1), 12 Neck side, right (cut 1), 13 Throat (cut 1), 14 Neck top, left (cut 1), 14 Neck top, right (cut 1), 15 Head side, left (cut 1), 15 Head side, right (cut 1), 16 Jaw (cut 1), 17 Head top, left (cut 1), 17 Head top, right (cut 1), 18 Snout side, left (cut 1), 18 Snout side, right (cut 1), 19 Chin (cut 1), 20 Snout top, left (cut 1), 20 Snout top, right (cut 1), 21 Nose (cut 1), 22 Tail side 1, left (cut 1), 22 Tail side 1, right (cut 1), 23 Tail underside 1 (cut 1), 24 Tail top 1, left (cut 1), 24 Tail top 1, right (cut 1), 25 Tail side 2, left (cut 1), 25 Tail side 2, right (cut 1), 26 Tail underside 2 (cut 1), 27 Tail top 2, left (cut 1), 27 Tail top 2, right (cut 1), 28 Tail side 3, left (cut 1), 28 Tail side 3, right (cut 1), 29 Tail underside 3 (cut 1), 30 Tail top 3, left (cut 1), 30 Tail top 3, right (cut 1), 31 Tail tip underside (cut 1), 32 Tail tip, left (cut 1), 32 Tail tip, right (cut 1), 33 Plate 1, left (cut 1), 34 Plate 1, right (cut 1), 35 Plate 2, left (cut 1), 36 Plate 2, right (cut 1), 37 Plate 3, left (cut 1), 38 Plate 3, right (cut 1), 39 Plate 4, left (cut 1), 40 Plate 4, right (cut 1), 41 Plate 5, left (cut 1), 42 Plate 5, right (cut 1), 43 Plate 6, left (cut 1), 44 Plate 6, right (cut 1), 45 Spike 1 (cut 1), 46 Spike 2 (cut 1), 47 Spike 3 (cut 1), 48 Spike 4 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $30 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50947943497776,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/origami-stegosaurus-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780751"},{"product_id":"paper-template-origami-chameleon","title":"The Origami Chameleon Paper Template","description":"\u003cp\u003eA chameleon on a branch, built from 64 flat slab facets like folded paper, its square tail curling into a spiral beside the branch. A chameleon walking the top of its own branch, casque up, tail curled into a spiral on the table. About 13 3\/8 in long. Its branch is part of the piece, so it sits anywhere, from a shelf to a windowsill.\u003c\/p\u003e\n\u003cp\u003eFinished: 13 3\/8 in long, 8 5\/8 in tall and 3 5\/8 in wide at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Branch foot, back (cut 1), 02 Branch 1 (cut 1), 03 Branch 2 (cut 1), 04 Branch 3 (cut 1), 05 Branch 4 (cut 1), 06 Branch 5 (cut 1), 07 Branch foot, front (cut 1), 08 Rear body belly side, left (cut 1), 09 Rear body belly side, right (cut 1), 10 Rear body side, left (cut 1), 11 Rear body side, right (cut 1), 12 Rear body back, left (cut 1), 13 Rear body back, right (cut 1), 14 Front body belly side, left (cut 1), 15 Front body belly side, right (cut 1), 16 Front body side, left (cut 1), 17 Front body side, right (cut 1), 18 Front body back, left (cut 1), 19 Front body back, right (cut 1), 20 Rump low, left (cut 1), 21 Rump side, left (cut 1), 22 Rump top, left (cut 1), 23 Rump low, right (cut 1), 24 Rump side, right (cut 1), 25 Rump top, right (cut 1), 26 Rump underside (cut 1), 27 Rump top (cut 1), 28 Back of head underside (cut 1), 29 Back of head low side, left (cut 1), 30 Back of head low side, right (cut 1), 31 Back of head side, left (cut 1), 32 Back of head side, right (cut 1), 33 Back of head top, left (cut 1), 34 Back of head top, right (cut 1), 35 Head middle underside (cut 1), 36 Head middle low side, left (cut 1), 37 Head middle low side, right (cut 1), 38 Head middle side, left (cut 1), 39 Head middle side, right (cut 1), 40 Head middle top, left (cut 1), 41 Head middle top, right (cut 1), 42 Head front underside (cut 1), 43 Head front side, left (cut 1), 44 Head front side, right (cut 1), 45 Head front top, left (cut 1), 46 Head front top, right (cut 1), 47 Snout (cut 1), 48 Casque (cut 1), 49 Tail 1 (cut 1), 50 Tail 2 (cut 1), 51 Tail 3 (cut 1), 52 Tail 4 (cut 1), 53 Tail 5 (cut 1), 54 Tail 6 (cut 1), 55 Tail rest (cut 1), 56 Tail 7 (cut 1), 57 Tail 8 (cut 1), 58 Tail 9 (cut 1), 59 Tail 10 (cut 1), 60 Tail tip (cut 1), 61 Front leg, left (cut 1), 62 Front leg, right (cut 1), 63 Back leg, left (cut 1), 64 Back leg, right (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $30 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50948122411056,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/origami-chameleon-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793597811"},{"product_id":"paper-template-origami-gorilla","title":"The Origami Gorilla Paper Template","description":"\u003cp\u003eA silverback gorilla on its knuckles, built from 82 flat slab facets like folded paper, with a high hump and a peaked crest. A silverback gorilla walking on its knuckles, all shoulders and brow, in faceted stoneware. It stands 10 5\/16 in at the hump and 10 3\/8 in long. The biggest animal in the origami set, and the boldest.\u003c\/p\u003e\n\u003cp\u003eFinished: 10 5\/16 in tall at the hump, 10 3\/8 in long and 12 in across the arms at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Hand, left (cut 1), 02 Forearm, left (cut 1), 03 Forearm inside, left (cut 1), 04 Upper arm, left (cut 1), 05 Upper arm inside, left (cut 1), 06 Hand, right (cut 1), 07 Forearm, right (cut 1), 08 Forearm inside, right (cut 1), 09 Upper arm, right (cut 1), 10 Upper arm inside, right (cut 1), 11 Foot, left (cut 1), 12 Shin, left (cut 1), 13 Thigh, left (cut 1), 14 Foot, right (cut 1), 15 Shin, right (cut 1), 16 Thigh, right (cut 1), 17 Haunch, left (cut 1), 17 Haunch, right (cut 1), 18 Armpit, left (cut 1), 18 Armpit, right (cut 1), 19 Rear belly, left (cut 1), 19 Rear belly, right (cut 1), 20 Belly, left (cut 1), 20 Belly, right (cut 1), 21 Chest, left (cut 1), 21 Chest, right (cut 1), 22 Lower flank, left (cut 1), 22 Lower flank, right (cut 1), 23 Hip side, left (cut 1), 23 Hip side, right (cut 1), 24 Flank, left (cut 1), 24 Flank, right (cut 1), 25 Shoulder side, left (cut 1), 25 Shoulder side, right (cut 1), 26 Rump, low, left (cut 1), 26 Rump, low, right (cut 1), 27 Rump, lower side, left (cut 1), 27 Rump, lower side, right (cut 1), 28 Rump, upper side, left (cut 1), 28 Rump, upper side, right (cut 1), 29 Rump, top, left (cut 1), 29 Rump, top, right (cut 1), 30 Hip top, left (cut 1), 30 Hip top, right (cut 1), 31 Back, left (cut 1), 31 Back, right (cut 1), 32 Hump, left (cut 1), 32 Hump, right (cut 1), 33 Upper chest, left (cut 1), 33 Upper chest, right (cut 1), 34 Collar, left (cut 1), 34 Collar, right (cut 1), 35 Neck side, left (cut 1), 35 Neck side, right (cut 1), 36 Nape, left (cut 1), 36 Nape, right (cut 1), 37 Throat, left (cut 1), 37 Throat, right (cut 1), 38 Back of the jaw, left (cut 1), 38 Back of the jaw, right (cut 1), 39 Back of the head, left (cut 1), 39 Back of the head, right (cut 1), 40 Crest, left (cut 1), 40 Crest, right (cut 1), 41 Underside of the jaw, left (cut 1), 41 Underside of the jaw, right (cut 1), 42 Cheek, left (cut 1), 42 Cheek, right (cut 1), 43 Temple, left (cut 1), 43 Temple, right (cut 1), 44 Forehead, left (cut 1), 44 Forehead, right (cut 1), 45 Chin, left (cut 1), 45 Chin, right (cut 1), 46 Jaw, left (cut 1), 46 Jaw, right (cut 1), 47 Eye, left (cut 1), 47 Eye, right (cut 1), 48 Brow, left (cut 1), 48 Brow, right (cut 1), 49 Face (cut 1), 50 Muzzle (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $30 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50948256956464,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/origami-gorilla-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780763"},{"product_id":"paper-template-whale-shark-wall-sculpture","title":"The Whale Shark Wall Sculpture Paper Template","description":"\u003cp\u003eA faceted whale shark wall sculpture 19 1\/2 in long, closed all the way round, built from 39 flat facets over six ribs. A geometric whale shark that swims across your wall, 19 1\/2 inches from its blunt nose to its tail, faceted like a cut gem and closed all the way round. It hangs flat on two screws, bought separately, and the back plate prints in three parts that tape together.\u003c\/p\u003e\n\u003cp\u003eFinished: 19 1\/2 in long, 6 15\/16 in tall, 2 3\/8 in off the wall at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Back plate (cut 1), Rib 1 (cut 1), Rib 2 (cut 1), Rib 3 (cut 1), Rib 4 (cut 1), Rib 5 (cut 1), Rib 6 (cut 1), Facet N (cut 1), Facet A1 (cut 1), Facet A2 (cut 1), Facet A3 (cut 1), Facet A4 (cut 1), Facet A5 (cut 1), Facet A6 (cut 1), Facet A7 (cut 1), Facet B1 (cut 1), Facet B2 (cut 1), Facet B3 (cut 1), Facet B4 (cut 1), Facet B5 (cut 1), Facet B6 (cut 1), Facet B7 (cut 1), Facet C1 (cut 1), Facet C2 (cut 1), Facet C3 (cut 1), Facet C4 (cut 1), Facet C5 (cut 1), Facet C6 (cut 1), Facet C7 (cut 1), Facet D1 (cut 1), Facet D2 (cut 1), Facet D3 (cut 1), Facet D4 (cut 1), Facet D5 (cut 1), Facet D6 (cut 1), Facet D7 (cut 1), Facet T1 (cut 1), Facet T2 (cut 1), Facet T3 (cut 1), Facet T4 (cut 1), Facet T5 (cut 1), Facet T6 (cut 1), Facet T7 (cut 1), Facet T8 (cut 1), Facet T9 (cut 1), Facet T10 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 20 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe back plate prints in three parts that tape together, with matching triangles and a length to check\u003c\/li\u003e\n\u003cli\u003eA hardware page: what to buy and a drawing of how it goes together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50985949921328,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/whale-shark-wall-sculpture-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793645677"},{"product_id":"paper-template-seven-drawer-vanity-chest","title":"The Seven Drawer Vanity Chest Paper Template","description":"\u003cp\u003eA chest of seven graduated drawers with a tray top and a plinth, for a dresser or a bathroom counter. Seven drawers in four sizes for a dresser or a bathroom counter: rings and earrings up top, brushes and bottles in the deep one at the bottom. It takes about 60 lb of clay and 14 hours over four sittings, weighs about 37 lb fired, and fires on its back on a full kiln shelf.\u003c\/p\u003e\n\u003cp\u003eFinished: 13 15\/16 in tall, 12 7\/8 in wide and 8 in deep, about 37 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e35 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Top (cut 1), Bottom (cut 1), Side (cut 2), Back (cut 1), Shelf (cut 3), Chest divider (cut 3), Plinth strip (cut 4), Gallery rail (cut 3), Drawer front (cut 7), Drawer back (cut 7), Drawer side (cut 14), Drawer bottom (cut 7), Drawer divider (cut 3)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 46 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe big panels print in three or four parts and the long pieces in two, taped together with matching triangles and a size to check\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 3\/8 in and 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50989058588720,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/seven-drawer-vanity-chest-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793693980"},{"product_id":"paper-template-geometric-expecting-mother","title":"The Geometric Expecting Mother Paper Template","description":"\u003cp\u003eA kneeling expecting mother cradling her belly, head bowed toward it, in 35 folded slab pieces. A mother-to-be kneeling with both hands around her belly and her head bowed toward it, like she is telling the baby something. Simple, abstract and very tender. It stands 12 7\/16 in tall in crisp facets, built from flat slabs.\u003c\/p\u003e\n\u003cp\u003eFinished: 12 7\/16 in tall, 9 in x 6 in at the base at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Floor (cut 1), 02 Base 1 (cut 1), 03 Base 2 (cut 1), 04 Base 3 (cut 1), 05 Base 4 (cut 1), 06 Base 5 (cut 1), 07 Base 6 (cut 1), 08 Base 7 (cut 1), 09 Base 8 (cut 1), 10 Base 9 (cut 1), 11 Base 10 (cut 1), 12 Base 11 (cut 1), 13 Base 12 (cut 1), 14 Base 13 (cut 1), 15 Base 14 (cut 1), 16 Body 1 (cut 1), 17 Body 2 (cut 1), 18 Body 3 (cut 1), 19 Body 4 (cut 1), 20 Body 5 (cut 1), 21 Body 6 (cut 1), 22 Upper body 1 (cut 1), 23 Body 7 (cut 1), 24 Body 8 (cut 1), 25 Upper body 2 (cut 1), 26 Upper body 3 (cut 1), 27 Upper body 4 (cut 1), 28 Upper body 5 (cut 1), 29 Upper body 6 (cut 1), 30 Head 1 (cut 1), 31 Head 2 (cut 1), 32 Head 3 (cut 1), 33 Head 4 (cut 1), 34 Head 5 (cut 1), 35 Head 6 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50989410156592,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/geometric-expecting-mother-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780703"},{"product_id":"paper-template-geometric-mother-and-child","title":"The Geometric Mother and Child Paper Template","description":"\u003cp\u003eA kneeling mother holding her small child cheek to cheek, in 54 folded slab pieces. A mother kneeling with her little one held close, cheek to cheek, her head bowed onto the child's. The faces are plain ovals and the whole thing still lands right in the chest. It stands 12 7\/16 in tall in crisp facets, built from flat slabs.\u003c\/p\u003e\n\u003cp\u003eFinished: 12 7\/16 in tall, 9 1\/16 in x 7 1\/16 in at the base at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e11 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Floor (cut 1), 02 Base 1 (cut 1), 03 Base 2 (cut 1), 04 Base 3 (cut 1), 05 Base 4 (cut 1), 06 Base 5 (cut 1), 07 Base 6 (cut 1), 08 Base 7 (cut 1), 09 Base 8 (cut 1), 10 Base 9 (cut 1), 11 Base 10 (cut 1), 12 Base 11 (cut 1), 13 Base 12 (cut 1), 14 Base 13 (cut 1), 15 Base 14 (cut 1), 16 Base 15 (cut 1), 17 Base 16 (cut 1), 18 Base 17 (cut 1), 19 Body 1 (cut 1), 20 Base 18 (cut 1), 21 Base 19 (cut 1), 22 Base 20 (cut 1), 23 Base 21 (cut 1), 24 Base 22 (cut 1), 25 Base 23 (cut 1), 26 Body 2 (cut 1), 27 Body 3 (cut 1), 28 Body 4 (cut 1), 29 Body 5 (cut 1), 30 Body 6 (cut 1), 31 Base 24 (cut 1), 32 Body 7 (cut 1), 33 Body 8 (cut 1), 34 Body 9 (cut 1), 35 Body 10 (cut 1), 36 Body 11 (cut 1), 37 Body 12 (cut 1), 38 Body 13 (cut 1), 39 Body 14 (cut 1), 40 Body 15 (cut 1), 41 Upper body 1 (cut 1), 42 Upper body 2 (cut 1), 43 Upper body 3 (cut 1), 44 Upper body 4 (cut 1), 45 Child's head 1 (cut 1), 46 Her head 1 (cut 1), 47 Child's head 2 (cut 1), 48 Child's head 3 (cut 1), 49 Her head 2 (cut 1), 50 Her head 3 (cut 1), 51 Her head 4 (cut 1), 52 Her head 5 (cut 1), 53 Her head 6 (cut 1), 54 Her head 7 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50989939490864,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/geometric-mother-and-child-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793701995"},{"product_id":"paper-template-geometric-father-and-child","title":"The Geometric Father and Child Paper Template","description":"\u003cp\u003eA kneeling father with his child riding on his shoulders, in 56 folded slab pieces. A dad kneeling with his kid up on his shoulders, looking up while the little one leans over to look down at him. Every parent knows that exact moment. It stands 17 3\/16 in tall in crisp facets, built from flat slabs.\u003c\/p\u003e\n\u003cp\u003eFinished: 17 3\/16 in tall, 10 3\/16 in x 7 3\/8 in at the base at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Floor (cut 1), 02 Base 1 (cut 1), 03 Base 2 (cut 1), 04 Base 3 (cut 1), 05 Base 4 (cut 1), 06 Base 5 (cut 1), 07 Base 6 (cut 1), 08 Base 7 (cut 1), 09 Base 8 (cut 1), 10 Base 9 (cut 1), 11 Base 10 (cut 1), 12 Base 11 (cut 1), 13 Base 12 (cut 1), 14 Base 13 (cut 1), 15 Base 14 (cut 1), 16 Base 15 (cut 1), 17 Body 1 (cut 1), 18 Body 2 (cut 1), 19 Base 16 (cut 1), 20 Body 3 (cut 1), 21 Body 4 (cut 1), 22 Body 5 (cut 1), 23 Body 6 (cut 1), 24 Body 7 (cut 1), 25 Body 8 (cut 1), 26 Body 9 (cut 1), 27 Body 10 (cut 1), 28 Body 11 (cut 1), 29 Body 12 (cut 1), 30 Upper body 1 (cut 1), 31 His head 1 (cut 1), 32 His head 2 (cut 1), 33 Upper body 2 (cut 1), 34 Upper body 3 (cut 1), 35 Upper body 4 (cut 1), 36 His head 3 (cut 1), 37 Upper body 5 (cut 1), 38 His head 4 (cut 1), 39 His head 5 (cut 1), 40 His head 6 (cut 1), 41 Upper body 6 (cut 1), 42 Upper body 7 (cut 1), 43 Upper body 8 (cut 1), 44 His head 7 (cut 1), 45 Upper body 9 (cut 1), 46 Upper body 10 (cut 1), 47 His head 8 (cut 1), 48 His head 9 (cut 1), 49 Child's head 1 (cut 1), 50 Child's head 2 (cut 1), 51 Child's head 3 (cut 1), 52 Child's head 4 (cut 1), 53 Child's head 5 (cut 1), 54 Child's head 6 (cut 1), 55 Child's head 7 (cut 1), 56 Child's head 8 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50989948272688,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/geometric-father-and-child-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780690"},{"product_id":"paper-template-geometric-lovers","title":"The Geometric Lovers Paper Template","description":"\u003cp\u003eTwo lovers kneeling face to face in a tender embrace, in 62 folded slab pieces, her head on his chest. Two lovers kneeling face to face, her head on his chest and his cheek resting on her hair. No faces, no details, and somehow you can still tell exactly what is happening. It stands 13 5\/8 in tall in crisp facets, built entirely from flat slabs.\u003c\/p\u003e\n\u003cp\u003eFinished: 13 5\/8 in tall, 7 1\/16 in x 10 7\/16 in at the base at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e14 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: 01 Floor (cut 1), 02 Base 1 (cut 1), 03 Base 2 (cut 1), 04 Base 3 (cut 1), 05 Base 4 (cut 1), 06 Base 5 (cut 1), 07 Base 6 (cut 1), 08 Base 7 (cut 1), 09 Base 8 (cut 1), 10 Base 9 (cut 1), 11 Base 10 (cut 1), 12 Base 11 (cut 1), 13 Base 12 (cut 1), 14 Base 13 (cut 1), 15 Base 14 (cut 1), 16 Base 15 (cut 1), 17 Base 16 (cut 1), 18 Body 1 (cut 1), 19 Body 2 (cut 1), 20 Base 17 (cut 1), 21 Base 18 (cut 1), 22 Body 3 (cut 1), 23 Base 19 (cut 1), 24 Base 20 (cut 1), 25 Body 4 (cut 1), 26 Body 5 (cut 1), 27 Body 6 (cut 1), 28 Body 7 (cut 1), 29 Body 8 (cut 1), 30 Body 9 (cut 1), 31 Body 10 (cut 1), 32 Body 11 (cut 1), 33 Body 12 (cut 1), 34 Body 13 (cut 1), 35 Body 14 (cut 1), 36 Body 15 (cut 1), 37 Body 16 (cut 1), 38 Upper body 1 (cut 1), 39 Her head 1 (cut 1), 40 Upper body 2 (cut 1), 41 Upper body 3 (cut 1), 42 Upper body 4 (cut 1), 43 Upper body 5 (cut 1), 44 Upper body 6 (cut 1), 45 Upper body 7 (cut 1), 46 Upper body 8 (cut 1), 47 Upper body 9 (cut 1), 48 Upper body 10 (cut 1), 49 Upper body 11 (cut 1), 50 Upper body 12 (cut 1), 51 Upper body 13 (cut 1), 52 Upper body 14 (cut 1), 53 Her head 2 (cut 1), 54 Upper body 15 (cut 1), 55 Her head 3 (cut 1), 56 Her head 4 (cut 1), 57 Her head 5 (cut 1), 58 His head 1 (cut 1), 59 His head 2 (cut 1), 60 His head 3 (cut 1), 61 His head 4 (cut 1), 62 His head 5 (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 10 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe tall pieces print in two parts that tape together, with matching marks and a length to check\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50989970194480,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/geometric-lovers-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793780678"},{"product_id":"paper-template-splayed-leg-stool","title":"The Splayed Leg Stool Paper Template","description":"\u003cp\u003eA four-legged stoneware stool with a thick octagon seat, splayed tapered legs and rungs, 17 1\/2 in tall. Yes, you can actually sit on it. Four tapered legs lean out from a thick octagon seat, tied together by rungs that make a good footrest, and every angle is printed right on the pattern. It takes about 55 lb of clay and 10 hours over four sittings, weighs about 31 lb fired, and seats one adult up to 250 lb.\u003c\/p\u003e\n\u003cp\u003eFinished: 17 1\/2 in tall with a 14 in seat, about 31 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Seat (cut 1), Bottom plate (cut 1), Apron wall (cut 8), Long rib (cut 1), Short rib (cut 2), Leg face (cut 16), Rung top (cut 4), Rung bottom (cut 4), Rung side (cut 8)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 32 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe leg faces and the long rib print in two parts, taped together with matching triangles and a size to check\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $40 for everyone else. Drawn for a 3\/8 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50995666550832,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/splayed-leg-stool-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793725057"},{"product_id":"paper-template-giant-geometric-chess-king","title":"The Giant Geometric Chess King Paper Template","description":"\u003cp\u003eA 20 inch faceted Staunton chess king with a cross on top, built from 54 flat slab pieces. A chess king you could not lose under the couch if you tried: 20 inches of faceted Staunton, from the stepped plinth to the cross on top. The stem and the crown are cut like crystal, so every facet catches the light differently as you walk past. It takes about 14 lb of clay and about 20 hours over six sittings, and it needs a kiln with 21 inches of clear height.\u003c\/p\u003e\n\u003cp\u003eFinished: 20 in tall, 8 5\/8 in across the base, about 8 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 1), Plinth (cut 4), Cove (cut 4), Base ring (cut 4), Base ring top (cut 4), Shoulder (cut 4), Lower stem (cut 4), Upper stem (cut 2), Collar (cut 1), Collar top (cut 1), Crown neck (cut 2), Lower crown (cut 2), Upper crown (cut 4), Knob cap (cut 1), Dome top (cut 1), Dome (cut 2), Cross face (cut 2), Cross end (cut 3), Cross arm (cut 6), Cross foot (cut 2)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 33 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50995767672880,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/giant-geometric-chess-king-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793874118"},{"product_id":"paper-template-giant-geometric-chess-queen","title":"The Giant Geometric Chess Queen Paper Template","description":"\u003cp\u003eA 17 7\/8 inch faceted Staunton queen with a pointed coronet, from 45 flat slab pieces. The king finally has company: almost 18 inches of faceted Staunton queen, from the stepped plinth to the ball on top. Her crown flares into a ring of sixteen sharp points, and every facet catches the light differently as you walk past. She takes about 12 lb of clay, about 16 hours over six sittings and three weeks of slow drying, and she needs a kiln with 19 inches of clear height.\u003c\/p\u003e\n\u003cp\u003eFinished: 17 7\/8 in tall, 7 7\/8 in across the base, about 7 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 1), Plinth (cut 4), Cove (cut 4), Base ring (cut 4), Base ring top (cut 4), Shoulder (cut 4), Lower stem (cut 4), Upper stem (cut 2), Collar (cut 1), Collar top (cut 1), Crown neck (cut 2), Lower crown (cut 2), Upper crown (cut 4), Dome (cut 2), Dome top (cut 1), Ball underside (cut 1), Ball (cut 1), Ball top (cut 1), Ball cap (cut 1), Point (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 38 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":50996278558768,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/giant-geometric-chess-queen-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793874106"},{"product_id":"paper-template-thirteen-story-pagoda","title":"The Thirteen-Story Pagoda Paper Template","description":"\u003cp\u003eA 34 inch Chinese thirteen-story pagoda lantern in fifteen lift-off sections, its roof corners curling up, glowing from two strings of battery fairy lights inside. Thirteen stories, 34 inches tall, and every roof corner curls up into a scroll. Every arched door and round window is cut clean through, and two strings of battery fairy lights hidden inside make the whole tower glow. It lifts apart into fifteen sections, so each one fires on an ordinary kiln shelf.\u003c\/p\u003e\n\u003cp\u003eFinished: 34 in tall, the bottom roof 7 7\/8 in across, the base 8 7\/8 in across at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e21 template sheets, every piece drawn at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Bottom step wall (cut 7), Bottom step back wall (cut 1), Middle step wall (cut 8), Top step wall (cut 8), Bottom step plate (cut 1), Middle step plate (cut 1), Top step plate (cut 1), Cleat (cut 52), Small cleat (cut 4), Story 1 door wall (cut 4), Story 1 window wall (cut 4), Story 1 deck (cut 1), Story 1 roof (cut 8), Story 1 ridge (cut 8), Story 2 door wall (cut 4), Story 2 window wall (cut 4), Story 2 deck (cut 1), Story 2 roof (cut 8), Story 2 ridge (cut 8), Story 3 door wall (cut 4), Story 3 window wall (cut 4), Story 3 deck (cut 1), Story 3 roof (cut 8), Story 3 ridge (cut 8), Story 4 door wall (cut 4), Story 4 window wall (cut 4), Story 4 deck (cut 1), Story 4 roof (cut 8), Story 4 ridge (cut 8), Story 5 door wall (cut 4), Story 5 window wall (cut 4), Story 5 deck (cut 1), Story 5 roof (cut 8), Story 5 ridge (cut 8), Story 6 door wall (cut 4), Story 6 window wall (cut 4), Story 6 deck (cut 1), Story 6 roof (cut 8), Story 6 ridge (cut 8), Story 7 door wall (cut 4), Story 7 window wall (cut 4), Story 7 deck (cut 1), Story 7 roof (cut 8), Story 7 ridge (cut 8), Story 8 door wall (cut 4), Story 8 window wall (cut 4), Story 8 deck (cut 1), Story 8 roof (cut 8), Story 8 ridge (cut 8), Story 9 door wall (cut 4), Story 9 window wall (cut 4), Story 9 deck (cut 1), Story 9 roof (cut 8), Story 9 ridge (cut 8), Story 10 door wall (cut 4), Story 10 window wall (cut 4), Story 10 deck (cut 1), Story 10 roof (cut 8), Story 10 ridge (cut 8), Story 11 door wall (cut 4), Story 11 window wall (cut 4), Story 11 deck (cut 1), Story 11 roof (cut 8), Story 11 ridge (cut 8), Story 12 door wall (cut 4), Story 12 window wall (cut 4), Story 12 deck (cut 1), Story 12 roof (cut 8), Story 12 ridge (cut 8), Story 13 door wall (cut 4), Story 13 window wall (cut 4), Story 13 deck (cut 1), Story 13 roof (cut 8), Story 13 ridge (cut 8), Finial pedestal wall (cut 8), Finial pedestal plate (cut 1), Finial bulb, lower band (cut 1), Finial bulb, upper band (cut 1), Finial mast (cut 1), Finial gourd, lower band (cut 1), Finial gourd, upper band (cut 1), Finial top bulb, lower band (cut 1), Finial point (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 34 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003cli\u003eThe three base plates print in two parts that tape together, with matching triangles and a size to check\u003c\/li\u003e\n\u003cli\u003eA lights page: the battery fairy lights to buy, and how both strings run up through every story\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $60 for everyone else. Drawn for a 1\/4 in, the finial's cones 3\/16 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":51004644130864,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/thirteen-story-pagoda-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793783446"},{"product_id":"paper-template-giant-geometric-chess-bishop","title":"The Giant Geometric Chess Bishop Paper Template","description":"\u003cp\u003eA 14 3\/4 inch faceted Staunton bishop with a slotted mitre, from 48 flat slab pieces. The king and queen get their bishop: almost 15 inches of faceted Staunton with a real slot cut deep into his mitre. Every facet catches the light as you walk past. He takes about 9 lb of clay, about 14 hours over six sittings, and a kiln with 16 inches of clear height.\u003c\/p\u003e\n\u003cp\u003eFinished: 14 3\/4 in tall, 7 in across the base, about 5 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 1), Plinth (cut 4), Cove (cut 4), Base ring (cut 4), Base ring top (cut 4), Shoulder (cut 4), Lower stem (cut 4), Upper stem (cut 2), Collar (cut 1), Collar top (cut 1), Mitre neck (cut 2), Lower mitre (cut 2), Mitre belly, front (cut 1), Mitre belly, back (cut 1), Upper mitre, front left (cut 1), Upper mitre, front right (cut 1), Upper mitre, back (cut 1), Mitre shoulder, front (cut 1), Mitre shoulder, back (cut 1), Upper slot wall (cut 1), Lower slot wall (cut 1), Mitre top (cut 1), Ball underside (cut 1), Ball (cut 1), Ball top (cut 1), Ball cap (cut 1), Point (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 48 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":51004674539568,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/giant-geometric-chess-bishop-pottery-paper-template-the-clay-hole-draper-utah-r2.jpg?v=1793874093"},{"product_id":"paper-template-giant-geometric-chess-knight","title":"The Giant Geometric Chess Knight Paper Template","description":"\u003cp\u003eA 12 5\/8 inch faceted Staunton knight with a four-lock mane, from 54 slab pieces. The chess set's horse, head bowed, with a mane of four bold locks down his neck. Every facet catches the light as you walk past. Plan on about 7 lb of clay, about 14 hours over six sittings, and 14 inches of clear kiln height.\u003c\/p\u003e\n\u003cp\u003eFinished: 12 5\/8 in tall, 6 5\/8 in across the base, about 4 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 1), Plinth (cut 4), Cove (cut 4), Base ring (cut 4), Base ring top (cut 4), Shoulder (cut 4), Stem (cut 4), Collar (cut 1), Collar top (cut 1), Neck, left (cut 1), Neck, right (cut 1), Lower neck, left (cut 1), Lower neck, right (cut 1), Mid neck, left (cut 1), Mid neck, right (cut 1), Upper neck, left (cut 1), Upper neck, right (cut 1), Neck top, left (cut 1), Neck top, right (cut 1), Throat, left (cut 1), Throat, right (cut 1), Throatlatch, left (cut 1), Throatlatch, right (cut 1), Jowl, left (cut 1), Jowl, right (cut 1), Poll, left (cut 1), Poll, right (cut 1), Crown, left (cut 1), Crown, right (cut 1), Brow, left (cut 1), Brow, right (cut 1), Face, left (cut 1), Face, right (cut 1), Muzzle, left (cut 1), Muzzle, right (cut 1), Muzzle end (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 46 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":51014921814064,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/giant-geometric-chess-knight-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793914284"},{"product_id":"paper-template-giant-geometric-chess-rook","title":"The Giant Geometric Chess Rook Paper Template","description":"\u003cp\u003eAn 11 5\/8 inch faceted Staunton rook with eight square battlements, from 36 slab pieces. The castle of the set: a stout faceted tower with eight square battlements cut round his top and a flat deck sunk inside them. Glazed black, every facet throws its own highlight. Plan on about 8 lb of clay, about 12 hours over six sittings, and 13 inches of clear kiln height.\u003c\/p\u003e\n\u003cp\u003eFinished: 11 5\/8 in tall, 6 3\/8 in across the base, about 4 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 1), Plinth (cut 4), Cove (cut 4), Base ring (cut 4), Base ring top (cut 4), Shoulder (cut 4), Lower tower (cut 4), Upper tower (cut 2), Collar (cut 1), Collar top (cut 1), Turret neck (cut 2), Turret (cut 2), Parapet (cut 2), Deck (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 36 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":51017379512368,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/giant-geometric-chess-rook-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793946841"},{"product_id":"paper-template-giant-geometric-chess-pawn","title":"The Giant Geometric Chess Pawn Paper Template","description":"\u003cp\u003eA 10 1\/2 inch faceted Staunton pawn with a big crystal-cut ball, from 42 slab pieces. The smallest piece in the set, and the roundest: a faceted Staunton pawn whose ball is cut like a gemstone, eighty-odd triangles round it. Glazed black, every one of them catches the light. Plan on about 6 lb of clay, about 12 hours over six sittings, and 12 inches of clear kiln height.\u003c\/p\u003e\n\u003cp\u003eFinished: 10 1\/2 in tall, 5 7\/8 in across the base, about 3 lb at 12 percent shrinkage.\u003c\/p\u003e\n\u003ch3\u003eIn the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 template sheets, every piece whole at exact size, with a 1 inch check square on each\u003c\/li\u003e\n\u003cli\u003eThe pieces: Floor (cut 1), Plinth (cut 4), Cove (cut 4), Base ring (cut 4), Base ring top (cut 4), Shoulder (cut 4), Lower stem (cut 4), Upper stem (cut 2), Collar (cut 1), Collar top (cut 1), Ball neck (cut 2), Ball underside (cut 2), Lower ball (cut 2), Ball (cut 2), Upper ball (cut 2), Ball top (cut 2), Point (cut 1)\u003c\/li\u003e\n\u003cli\u003eOne page on printing, rolling and the seam method\u003c\/li\u003e\n\u003cli\u003eAssembly in 39 numbered steps, then drying, glazing and what goes wrong\u003c\/li\u003e\n\u003cli\u003eA size table at 10, 12 and 14 percent shrinkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree for members, logged in to a Clay Hole account. $50 for everyone else. Drawn for a 1\/4 in slab. See the whole set on \u003ca href=\"https:\/\/theclayhole.com\/pages\/pottery-paper-templates\"\u003ethe pottery paper templates page\u003c\/a\u003e.\u003c\/p\u003e","brand":"The Clay Hole","offers":[{"title":"Default Title","offer_id":51022980022320,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/5627\/3968\/files\/giant-geometric-chess-pawn-pottery-paper-template-the-clay-hole-draper-utah.jpg?v=1793986353"}],"url":"https:\/\/theclayhole.com\/collections\/insane-pottery-templates.oembed","provider":"The Clay Hole - Pottery \u0026 Art Community","version":"1.0","type":"link"}